Engineers behind China's J-35 fighter jet have used metal 3D printing to create a primary load-bearing structure over five meters long for military aircraft applications, according to a report from Global Times. The component was produced by the Shenyang Aircraft Design and Research Institute, a research organization under Aviation Industry Corporation of China (AVIC), and is described as the culmination of decades of research and development in metal additive manufacturing.
The institute has been working on 3D-printed aircraft components since 2003. In 2005, it achieved secondary load-bearing structures; in 2012, it produced large primary load-bearing titanium alloy structures, earning additive manufacturing expert Wang Huaming and his team China's National Technological Invention Award.
The latest structure, at over 16.4 feet in length, is not printed in one piece. To avoid warping and cracking, the team employed two techniques: Segmented Additive Manufacturing (SAM) and additive fusion joining. The process involves 3D-printing metal into the intentionally designed gaps between separately produced components, effectively fusing them into a single whole.
Additive manufacturing eliminates the need for expensive moulds and multi-part construction, the report notes. Titanium alloys are notoriously difficult to machine, cast components are usually weak, and joining parts with bolts and screws requires additional labour. Metal 3D printing creates a strong part in the desired shape, minimising the need for fasteners and allowing faster iteration and more complex structures than traditional manufacturing.
Analysis
Why This Matters
- Aircraft structure can now be built more quickly and with fewer weak points, potentially speeding production and improving airframe performance.
- The method could reduce costs and lead times for military aircraft programs, giving China an edge in fighter production if scaled.
- It demonstrates a maturing technology that may spread to commercial aerospace and other industries.
Background
3D printing, or additive manufacturing, has been used in aerospace for small parts and prototypes for years, but producing large, load-bearing metal components is a significant challenge due to warping and cracking during printing. The Shenyang institute's work since 2003 has progressively moved from secondary to primary structures, using titanium alloys known for high strength-to-weight ratio and difficulty to machine traditionally.
Key Perspectives
Wang Huaming and his team: Earned China's National Technological Invention Award in 2013 for earlier work on large titanium alloy structures.
The Shenyang Aircraft Design and Research Institute / AVIC: The engineers are behind the J-35 fighter jet platform, and the new technique is described as the culmination of decades of R&D in metal additive manufacturing.
What to Watch
- Whether the technology is adopted for serial production of the J-35 and other Chinese military aircraft.
- Any export or technology spillover into China's commercial aviation sector, such as COMAC's C919 or C929 programs.
- International reaction, particularly from the US and its allies, who may seek similar capabilities to maintain parity.
Checked
12 claims in this story checked against 1 source: 12 supported.
Show each claim
- SupportedEngineers behind China’s J-35 used metal 3D printing to create large primary load-bearing structures for military aircraft.Latest from Tom's Hardware: “The Shenyang Aircraft Design and Research Institute, the developers of China’s J-35 fighter jet platform, used metal 3D printing to create large primary load-bearing structures for military aircraft applications.”
- SupportedThe structure is over five meters long.Latest from Tom's Hardware: “Global Times reports the structure is over 16.4 feet (five meters) in length, using segmented printing and fusion techniques.”
- SupportedThe Shenyang Aircraft Design and Research Institute produced the structure.Latest from Tom's Hardware: “The Shenyang Aircraft Design and Research Institute, the developers of China’s J-35 fighter jet platform, used metal 3D printing to create large primary load-bearing structures for military aircraft applications.”
- SupportedThe story attributes the structure’s length and manufacturing techniques to a Global Times report.Latest from Tom's Hardware: “Global Times reports the structure is over 16.4 feet (five meters) in length, using segmented printing and fusion techniques.”
- SupportedThe institute is a research organization under AVIC, and the structures are described as the culmination of decades of metal additive-manufacturing research and development.Latest from Tom's Hardware: “The impressively large 3D-printed components are the culmination of decades of research and development of various metal additive manufacturing techniques.”
- SupportedThe institute has worked on 3D-printed aircraft components since 2003.Latest from Tom's Hardware: “Shenyang Aircraft Design and Research Institute, a research organization under the Aviation Industry Corporation of China (AVIC), has been working on 3D-printed aircraft components since 2003.”
- SupportedIn 2005, the team achieved secondary load-bearing structures.Latest from Tom's Hardware: “in 2005, they achieved secondary load-bearing structures;”
- SupportedIn 2012, the team produced large primary load-bearing titanium alloy structures, and Wang Huaming and his team received China’s National Technological Invention Award.Latest from Tom's Hardware: “then, in 2012, large primary load-bearing titanium alloy structures, earning additive manufacturing expert Wang Huaming and his team China’s National Technological Invention Award.”
- SupportedThe structure was not printed in one piece; the team used segmented additive manufacturing and additive fusion joining to address warping and cracking risks.Latest from Tom's Hardware: “The massive component is not printed in one piece, as printing such a large structure faces warping and cracking issues... To avoid these problems, two techniques were employed: Segmented Additive Manufacturing (SAM) and additive fusion joining.”
- SupportedThe process prints metal into intentionally designed gaps between components to create one whole.Latest from Tom's Hardware: “basically, metal 3D printing into the intentionally designed gaps between the components and creating one whole printed piece.”
- SupportedAdditive manufacturing eliminates the need for expensive moulds and multi-part construction.Latest from Tom's Hardware: “Additive manufacturing eliminates the need for expensive molds and multi-part construction.”
- SupportedTitanium alloys are difficult to machine, cast components are usually weak, and bolted or screwed joins require additional labour; 3D printing can make a strong part in the desired shape, reduce the need for fasteners, and enable faster iteration and more complex structures.Latest from Tom's Hardware: “Titanium alloys are notoriously difficult to machine, cast components are usually weak, and joining parts using bolts and screws is additional labor — metal 3D printing solves all of this by creating a strong printed part in the desired shape in one large piece, minimizing the need for additional fasteners.”