Researchers at Concordia University have developed a new gel rocket fuel using lecithin, a common food emulsifier found in chocolate and salad dressing, that could overcome long-standing trade-offs between solid and liquid propellants. The gel remains stable in its tank and liquefies under pressure, heat or chemical triggers, potentially offering improved control for spacecraft and satellites.
In a paper published in the journal Langmuir, Pranay Mudaliar and Jerin John describe a kerosene gel that uses lecithin as an organic gelling agent. Solid rocket boosters are stable and quick to ignite but cannot be turned off once lit, while liquid fuels are controllable but can slosh in zero gravity and may leak or evaporate over long periods. Gels have long promised the best of both worlds but have their own challenges, including shelf life and temperature-dependent phase changes.
The new fuel uses lecithin molecules that, when combined with a trace amount of calcium chloride salt, self-organise into microscopic worm-like structures called micelles. These form an invisible 3D mesh that traps kerosene molecules in place. Unlike many previous non-combustible thickening agents, lecithin burns alongside the kerosene rather than acting as dead weight.
A key feature is shear thinning: the gel holds its shape firmly under normal conditions, eliminating sloshing, but when pressure is applied, such as when the spacecraft pressurises fuel lines, the micellar mesh breaks apart and the viscosity drops by a factor of more than 100, turning it into an easily pumpable liquid. When pressure stops, it snaps back to a gel. The same transformation can be triggered by heating to between 59 and 68 degrees Celsius or by adding a small amount of ethanol, allowing localised liquefaction without affecting the bulk fuel.
The gel is clear, enabling researchers to study its structure and spray patterns with optical cameras and lasers. It also remained stable in a tank for over a year with no visible phase separation, a common problem for other gelatinous fuels.
Significant work remains before the fuel reaches a launchpad. The gel has not yet been tested through the high-pressure injectors used in actual rocket engines, nor has it been shown to withstand launch vibrations and temperature shocks. Still, as Concordia researchers continue development, the gel is looking promising for potentially powering a future mission.
Analysis
Why This Matters
- Rocket propulsion has long faced a choice between the controllability of liquid fuels and the stability of solid fuels; the new gel could offer both, especially valuable for long-duration missions where sloshing and leakage are critical problems.
- The use of lecithin, an inexpensive and safe food additive, means the gelling agent is both combustible and already mass-produced, potentially lowering the cost and complexity of new propulsion systems.
- Shear-thinning behaviour and multiple triggers for liquefaction (pressure, heat, ethanol) give engineers flexible options for controlling fuel flow in zero gravity.
Background
Gel propellants have been studied for decades as a hybrid approach. They behave like solids when at rest, preventing sloshing and enabling stable storage, but can be made to flow like liquids when pumped. The challenge has been finding gelling agents that are stable over long periods, compatible with common fuels, and that do not add significant inert mass. Lecithin is a naturally occurring phospholipid widely used in food processing as an emulsifier; its ability to form micelles in kerosene had not been exploited for rocketry before.
What to Watch
- Tests of the gel through high-pressure injector nozzles mimicking actual rocket engine conditions.
- Vibration and thermal shock trials to see if the gel maintains its structure during launch.
- Any interest from space agencies or private launch providers in scaling up production and testing.
Checked
12 claims in this story checked against 1 source: 12 supported.
Show each claim
- SupportedLecithin, a common food emulsifier, is used to make a stable gel rocket fuel.Universe Today: “Lecithin is commonly used as an emulsifier in food. It’s commonly used to keep chocolate smooth, and salad dressing cohesive”
- SupportedConcordia researchers Pranay Mudaliar and Jerin John describe a lecithin-based kerosene gel.Universe Today: “a new paper published by Pranay Mudaliar and Jerin John of Concordia in the journal Langmuir uses an uncommon ingredient”
- SupportedThe gel holds its shape in a tank and can liquefy under pressure, heat or ethanol.Universe Today: “When the gel is sitting under normal conditions in a tank, it holds it shape firmly like a gelatin”
- SupportedThe gel could improve control of spacecraft and satellite propulsion.Universe Today: “Concordia University - RESEARCH: New gel fuel could make rocket and satellite propulsion easier to control”
- SupportedThe gel could address trade-offs between solid and liquid rocket fuels.Universe Today: “On paper, gels offer a great solution to that. While sitting in a tank, they would act like a dense solid, but can also act like a liquid when forced into a combustion chamber.”
- SupportedLecithin combined with trace calcium chloride forms micelles that make a mesh trapping kerosene.Universe Today: “When combined with a trace amount of calcium chloride salt, lecithin molecules self-organize into microscopic worm-like structures called micelles. Chains of these form an invisible 3D mesh that can trap and hold kerosene molecules”
- SupportedLecithin burns alongside the kerosene rather than acting as dead weight.Universe Today: “it will burn right alongside the kerosene rather than acting as simply dead-weight like may other non-combustible thickening agents previously used to create gel fuels.”
- SupportedUnder pressure, the gel’s viscosity drops by a factor of more than 100, making it pumpable.Universe Today: “Measurements detailed in the paper show the gel’s viscosity dropping by a factor of more than 100, creating an easily pumpable liquid”
- SupportedHeating the gel to 59–68°C or adding a small amount of ethanol can trigger liquefaction.Universe Today: “if the gel is heated up to between 59 and 68 degrees C, or splashed with a small amount of ethanol.”
- SupportedThe gel remained stable in a tank for over a year without visible phase separation.Universe Today: “the gel stayed stable in a tank for over a year, with no visible signs of a phase separate”
- SupportedThe gel has not been tested through high-pressure injectors used in actual rocket engines.Universe Today: “The new fuel hasn’t actually been sprayed through the high-pressure injectors that would be used on an actual rocket engine.”
- SupportedThe gel has not been shown to withstand launch vibrations and temperature shocks.Universe Today: “Nor has it shown that it’s capable of withstanding the vibrations and temperature shocks that come from being launched into space.”